set the language and country/region
Usually, you set the language and country/region when you install the
HP Officejet. If you set the country/region or language incorrectly during
installation, use the following procedure.
Tip — If you are unable to read the front-panel display language,
but need to reset it, press S
ETUP
, 5, 5. Follow the onscreen
instructions.
1
Press S
ETUP
until 5:Maintenance appears, and then press E
NTER
.
2
Press
until
5:Set Language & Country/Region appears, and then press
E
NTER
.
3
Watch the display until the desired language appears. Enter the language
code on the keypad. Press 1 for yes or 2 for no when the display asks you
to confirm your selection.
After the language is selected, you are prompted with all the countries/
regions for that selected language.
hp officejet 5100 series
additional setup information
30
4
Watch the display until the desired country/region appears. Enter the
country/region code on the keypad. Press 1 for yes or 2 for no when the
display asks you to confirm your selection.
You can confirm the country/region and language by printing a Self-Test Report.
1
Press S
ETUP
until 1:Print Report appears, then press E
NTER
.
2
Press
until
5:Self-Test Report appears, then press E
NTER
.